Brass Copper Fittings (INDIA) Home Email Sitemap
Home About Us Products Resources Email Contact Us Sitemap
Copper Turned Parts | Copper Fittings | Copper Pressed Parts | Copper Casting | Bronze Fittings | Copper Washers | Copper Bronze Grounding Parts | Bronze Casting | Copper Electrical Components | Brass Electrical Components | Brass Turned Parts | Brass Fasteners | Brass Casting | Copper Casting Alloys | Brass Wires Rods Alloys | Brass Hardware Fittings | Brass Sanitary Pipe Fittings | Brass Hose Fittings | Stainless Steel Fittings | Brass Moulding Inserts | Copper Lugs Terminals
Copper Turned Parts
Copper Fittings
Copper Pressed Parts
Copper Casting
Bronze Fittings
Copper Washers
Copper Bronze Grounding Parts
Bronze Casting
Copper Electrical Components
Brass Electrical Components
Brass Turned Parts
Brass Fasteners
Brass Casting
Copper Casting Alloys
Brass Wires Rods Alloys
Brass Hardware Fittings
Brass Sanitary Pipe fittings
Brass Hose Fittings
Stainless Steel Fittings
Brass Moulding Inserts
Copper Lugs Terminals
              Stainless Steel Springs

Stainless Steel Springs   Stainless Steel Springs   Stainless Steel Springs


Compression Spring Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Compression Spring


Compression Spring Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Compression Spring


Flat Wire Spring Flat Wire Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Industrial Coils Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Industrial Coils Spring


Coil Spring Coil Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Compression Spring


Helical Compression Springs Helical Compression Springs


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Compression Coil Spring


Compression Heavy Coil Spring Compression Heavy Coil Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Flat Compression Spring


Conical Compression Spring Conical Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Stainless Steel Compression Spring


Helical Spring Helical Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Compression Spring


Industrial Coils Spring Industrial Coils Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Helical Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Helical Compression Spring


Suspension Coils Spring Suspension Coils Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Compression Coil Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Compression Coil Spring


Square Compression Spring Square Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Helical Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Helical Compression Spring


Hot Coil Spring Hot Coil Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Conical Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Conical Compression Spring


Conical Spring Conical Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.


Coil Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Coil Compression Spring


Flat Wire Compression Spring Item Code: AE-026
We offer a comprehensive range of Flat Wire Compression Spring (AE-026) which is known its superior quality and cost effective prices. These are widely used to keep restricted space conditions in various products such as switches and relays & dies. Our products are available in various specifications of sizes, shapes & dimensions and can also be customized as per the client’s specifications.


Compression Spring (Item Code: AE-024)


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.
Compression Spring


Coils Compression Spring Coils Compression Spring


Characteristics :The gap between the successive coils is larger. It is made of round wire and wrapped in cylindrical shape with a constant pitch between the coils. By applying the load the spring contracts in action.

Capacity :Bar dia. 1 mm Upto 62 mm. Out side dia. 20 mm Upto 500 mm. Free height 10 mm Upto 1500 mm. Total coils as applicable. Load bearing capacity Upto 40tons. per pc.

Material Section :Round, Square, Rectangular taper, Flat or any special shape. Grade: 1mm upto 12mm IS:4454Pat-1 & Part-IV and 12mm upto 62mm Silico-Manganese steel 970/55 En-45, IS:3195 Gr.55Si7 and Gr.60Si7. Chrome - Vanadium Steel BS:970/55 En-47, IS:3195 Gr.50Cr4V2 and Gr.60Cr4V2, IS:5160, Sup-9 and SAE-4161H. Status of Finish: Shot peened, if required. Shot peening operation is followed as per IS:7001 to improve the fatigue life of spring.

Stainless Steel Compression Springs, Stainless Steel Extension Springs, Stainless Steel Springs, Stainless Steel Spring, Extension Springs, Stainless Steel Coil Springs, Stainless Steel Torsion Springs, Wire Springs, Tension Springs, Stainless Steel Compression Spring, Stainless Compression Springs, Beryllium Copper Springs, Drawbar Springs, Spiral Springs, Coiled Springs, Conical Springs, Small Compression Springs, Small Extension Springs, Custom Compression Springs, Buy Compression Springs, Coil Compression Spring, Flat Wire Spring, Coil Spring, Helical Compression Springs, Compression Spring, Compression Heavy Coil Spring, Flat Compression Spring, Conical Compression Spring, Stainless Steel Compression Spring, Helical Spring, Industrial Coils Spring, Helical Compression Spring, Suspension Coils Spring, Compression Coil Spring, Square Compression Spring, Square Compression Spring, Hot Coil Spring, Flat Wire Compression Spring Related words : Stainless Steel Compression Springs, Stainless Steel Extension Springs, Stainless Steel Springs, Stainless Steel Spring, Extension Springs, Stainless Steel Coil Springs, Stainless Steel Torsion Springs, Wire Springs, Tension Springs, Stainless Steel Compression Spring, Stainless Compression Springs, Beryllium Copper Springs, Drawbar Springs, Spiral Springs, Coiled Springs, Conical Springs, Small Compression Springs, Small Extension Springs, Custom Compression Springs, Buy Compression Springs, Coil Compression Spring, Flat Wire Spring, Coil Spring, Helical Compression Springs, Compression Spring, Compression Heavy Coil Spring, Flat Compression Spring, Conical Compression Spring, Stainless Steel Compression Spring, Helical Spring, Industrial Coils Spring, Helical Compression Spring, Suspension Coils Spring, Compression Coil Spring, Square Compression Spring, Square Compression Spring, Hot Coil Spring, Flat Wire Compression Spring
Please contact us for all your needs of

Stainless Steel Springs

at best prices from india. We are the biggest indian manufacturers exporters of

Stainless Steel Springs


Stainless Steel Strainers Stainless Steel Strainers Brass Moulding Inserts Brass Moulding Inserts
 Designed & maintained by:  www.conextechno.com 
Home | About Us | Products | Resources | Email | Contact Us | Sitemap
                   +